dmesg - LOGICAL VOLUME - 4096 MB DDR3-1333MHz
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-504.12.2.el6prerel7.2.0.0.0_88.3.0.x86_64 (pmclawho@coach-12) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Tue Apr 7 11:45:26 EDT 2015
Command line: ro root=/dev/mapper/vgroot-plat_root rd_NO_LUKS LANG=en_US.UTF-8 console=tty0 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vgroot/plat_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM 8250.nr_uarts=32 console=ttyS0,115200 max_loop=255 crashkernel=128M
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000df61f000 (usable)
BIOS-e820: 00000000df61f000 - 00000000df62c000 (ACPI data)
BIOS-e820: 00000000df62c000 - 00000000df62d000 (usable)
BIOS-e820: 00000000df62d000 - 00000000e4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000061ffff000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF4F40
DMI: HP ProLiant DL360 G6, BIOS P64 07/02/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x61ffff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdf62d max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000df62d000
0000000000 - 00df600000 page 2M
00df600000 - 00df62d000 page 4k
kernel direct mapping tables up to df62d000 @ 8000-e000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000061ffff000
0100000000 - 061fe00000 page 2M
061fe00000 - 061ffff000 page 4k
kernel direct mapping tables up to 61ffff000 @ c000-23000
RAMDISK: 3673b000 - 37fef087
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000df620140 000B4 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000df620240 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-611)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-611)
ACPI: DSDT 00000000df620340 0206D (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000df61f100 00040
ACPI: SPCR 00000000df61f140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000df61f1c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000df61f200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FFFF 00000000df61f240 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000df61f2c0 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000df61f300 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000df61f500 0015E (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000df61f680 00570 (v01 HP Proliant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000df61fc00 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000df61fd80 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000df61fdc0 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: DMAR 00000000df61fe80 00146 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: SSDT 00000000df6223c0 00125 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000df622500 001CF (v03 HP riser1a 00000002 INTL 20061109)
ACPI: SSDT 00000000df622700 003BB (v01 HP pcc 00000001 INTL 20090625)
ACPI: SSDT 00000000df622ac0 00377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 00000000df622e40 02B64 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 17 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 21 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 1
SRAT: PXM 1 -> APIC 23 -> Node 1
SRAT: Node 0 PXM 0 0-e0000000
SRAT: Node 0 PXM 0 100000000-320000000
SRAT: Node 1 PXM 1 320000000-620000000
NUMA: Using 29 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000320000000
NODE_DATA [0000000000022000 - 0000000000055fff]
bootmap [0000000000100000 - 0000000000163fff] pages 64
(8 early reservations) ==> bootmem [0000000000 - 0320000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000202abe4] TEXT DATA BSS ==> [0001000000 - 000202abe4]
#3 [003673b000 - 0037fef087] RAMDISK ==> [003673b000 - 0037fef087]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [000202b000 - 000202b49d] BRK ==> [000202b000 - 000202b49d]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000022000] PGTABLE ==> [000000c000 - 0000022000]
Bootmem setup node 1 0000000320000000-000000061ffff000
NODE_DATA [0000000320000040 - 000000032003403f]
bootmap [0000000320035000 - 0000000320094fff] pages 60
(8 early reservations) ==> bootmem [0320000000 - 061ffff000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000202abe4] TEXT DATA BSS
#3 [003673b000 - 0037fef087] RAMDISK
#4 [000009f400 - 0000100000] BIOS reserved
#5 [000202b000 - 000202b49d] BRK
#6 [0000008000 - 000000c000] PGTABLE
#7 [000000c000 - 0000022000] PGTABLE
found SMP MP-table at [ffff8800000f4f80] f4f80
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 25087MB)
[ffffea000af00000-ffffea000affffff] potential offnode page_structs
[ffffea0000000000-ffffea000affffff] PMD -> [ffff880028600000-ffff880032ffffff] on node 0
[ffffea000b000000-ffffea00157fffff] PMD -> [ffff880320200000-ffff88032a9fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0061ffff
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000df61f
0: 0x000df62c -> 0x000df62d
0: 0x00100000 -> 0x00320000
1: 0x00320000 -> 0x0061ffff
On node 0 totalpages: 3143102
DMA zone: 56 pages used for memmap
DMA zone: 125 pages reserved
DMA zone: 3817 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 896600 pages, LIFO batch:31
Normal zone: 30464 pages used for memmap
Normal zone: 2197760 pages, LIFO batch:31
On node 1 totalpages: 3145727
Normal zone: 43008 pages used for memmap
Normal zone: 3102719 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 32 CPUs, 16 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000df61f000 - 00000000df62c000
PM: Registered nosave memory: 00000000df62d000 - 00000000e4000000
PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90968 r8192 d23720 u131072
pcpu-alloc: s90968 r8192 d23720 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 6200896
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vgroot-plat_root rd_NO_LUKS LANG=en_US.UTF-8 console=tty0 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vgroot/plat_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM 8250.nr_uarts=32 console=ttyS0,115200 max_loop=255 crashkernel=128M
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 24565460k/25690108k available (5336k kernel code, 534792k absent, 589856k reserved, 7016k data, 1292k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1072
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 100663296 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2533.435 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.87 BogoMIPS (lpj=2533435)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21924 entries in 86 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000e7ffe000 flags: 0x1
dmar: IOMMU 0: reg_base_addr e7ffe000 ver 1:0 cap c90780106f0462 ecap f0207e
dmar: RMRR base: 0x000000df7fc000 end: 0x000000df7fdfff
dmar: RMRR base: 0x000000df7f5000 end: 0x000000df7fafff
dmar: RMRR base: 0x000000df63e000 end: 0x000000df63ffff
dmar: ATSR flags: 0x0
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 05
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
CPU erratum AAJ80 worked around
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 1, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 1, Processors #7 Ok.
Booting Node 0, Processors #8 Ok.
Booting Node 1, Processors #9 Ok.
Booting Node 0, Processors #10 Ok.
Booting Node 1, Processors #11 Ok.
Booting Node 0, Processors #12 Ok.
Booting Node 1, Processors #13 Ok.
Booting Node 0, Processors #14 Ok.
Booting Node 1, Processors #15
Brought up 16 CPUs
Total of 16 processors activated (81062.52 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2656 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e3ffffff
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL360 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0f])
pci_root PNP0A08:00: host bridge window [mem 0xe7000000-0xfbffffff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0x5fff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed03fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xe7000000-0xfbffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0x5fff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1000-0x101f]
pci 0000:00:1d.1: reg 20: [io 0x1020-0x103f]
pci 0000:00:1d.2: reg 20: [io 0x1040-0x105f]
pci 0000:00:1d.3: reg 20: [io 0x1060-0x107f]
pci 0000:00:1d.7: reg 10: [mem 0xf5df0000-0xf5df03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x1080-0x1087]
pci 0000:00:1f.2: reg 14: [io 0x1088-0x108b]
pci 0000:00:1f.2: reg 18: [io 0x1090-0x1097]
pci 0000:00:1f.2: reg 1c: [io 0x1098-0x109b]
pci 0000:00:1f.2: reg 20: [io 0x10a0-0x10af]
pci 0000:00:1f.2: reg 24: [io 0x10b0-0x10bf]
pci 0000:03:00.0: reg 10: [mem 0xfba00000-0xfbbfffff 64bit]
pci 0000:03:00.0: reg 18: [mem 0xfb9f0000-0xfb9f0fff 64bit]
pci 0000:03:00.0: reg 20: [io 0x4000-0x40ff]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:03:00.0: PME# supported from D0
pci 0000:03:00.0: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfbbfffff]
pci 0000:00:02.0: PCI bridge to [bus 0a-0a]
pci 0000:00:03.0: PCI bridge to [bus 07-09]
pci 0000:00:04.0: PCI bridge to [bus 0b-0b]
pci 0000:00:05.0: PCI bridge to [bus 0c-0c]
pci 0000:00:06.0: PCI bridge to [bus 0d-0d]
pci 0000:00:07.0: PCI bridge to [bus 0e-0e]
pci 0000:02:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10: [mem 0xf6000000-0xf7ffffff 64bit]
pci 0000:02:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:08.0: PCI bridge to [bus 02-02]
pci 0000:00:08.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:04:00.0: reg 10: [mem 0xfbe00000-0xfbffffff 64bit]
pci 0000:04:00.0: reg 18: [mem 0xfbdf0000-0xfbdf0fff 64bit]
pci 0000:04:00.0: reg 20: [io 0x5000-0x50ff]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:04:00.0: PME# supported from D0
pci 0000:04:00.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 04-06]
pci 0000:00:09.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbffffff]
pci 0000:00:0a.0: PCI bridge to [bus 0f-0f]
pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff]
pci 0000:01:03.0: reg 18: [mem 0xf5ff0000-0xf5ffffff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff]
pci 0000:01:04.0: reg 14: [mem 0xf5fe0000-0xf5fe01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff]
pci 0000:01:04.2: reg 14: [mem 0xf5fd0000-0xf5fd07ff]
pci 0000:01:04.2: reg 18: [mem 0xf5fc0000-0xf5fc3fff]
pci 0000:01:04.2: reg 1c: [mem 0xf5f00000-0xf5f7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20: [io 0x3800-0x381f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10: [mem 0xf5ef0000-0xf5ef00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf5e00000-0xf5ffffff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:00:1e.0: bridge window [mem 0xe7000000-0xfbffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x5fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT08._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT09._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT0A._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0077]
pnp 00:01: [io 0x0408-0x040f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0700-0x071f]
pnp 00:01: [io 0x0880-0x08ff]
pnp 00:01: [io 0x0900-0x097f]
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0c80-0x0c83]
pnp 00:01: [io 0x0cd4-0x0cd7]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x00f0]
pnp 00:01: [io 0x0ca0-0x0ca1]
pnp 00:01: [io 0x0ca4-0x0ca5]
pnp 00:01: [mem 0xe0000000-0xe3ffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xe7ffe000-0xe7ffffff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [io 0x03f8-0x03ff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0ca2-0x0ca3]
pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [dma 7]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x0620-0x065f]
pnp 00:08: [io 0x0680-0x069f]
pnp 00:08: [io 0x0600-0x061f]
pnp 00:08: [io 0x0660-0x067f]
pnp 00:08: [io 0x0300-0x031f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:09: [irq 3]
pnp 00:09: [io 0x02f8-0x02ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:0a: [io 0x0070-0x0071]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x03f8-0x03ff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xe7ffe000-0xe7ffffff] could not be reserved
pci 0000:00:01.0: BAR 15: assigned [mem 0xe7000000-0xe70fffff pref]
pci 0000:00:08.0: BAR 15: assigned [mem 0xe7100000-0xe71fffff pref]
pci 0000:00:09.0: BAR 15: assigned [mem 0xe7200000-0xe72fffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xe7000000-0xe707ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfbbfffff]
pci 0000:00:01.0: bridge window [mem 0xe7000000-0xe70fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 0a-0a]
pci 0000:00:03.0: PCI bridge to [bus 07-09]
pci 0000:00:04.0: PCI bridge to [bus 0b-0b]
pci 0000:00:05.0: PCI bridge to [bus 0c-0c]
pci 0000:00:06.0: PCI bridge to [bus 0d-0d]
pci 0000:00:07.0: PCI bridge to [bus 0e-0e]
pci 0000:02:00.0: BAR 6: assigned [mem 0xe7100000-0xe710ffff pref]
pci 0000:02:00.1: BAR 6: assigned [mem 0xe7110000-0xe711ffff pref]
pci 0000:00:08.0: PCI bridge to [bus 02-02]
pci 0000:00:08.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:08.0: bridge window [mem 0xe7100000-0xe71fffff pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xe7200000-0xe727ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 04-06]
pci 0000:00:09.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbffffff]
pci 0000:00:09.0: bridge window [mem 0xe7200000-0xe72fffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 0f-0f]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf5e00000-0xf5e1ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf5e20000-0xf5e2ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf5e00000-0xf5ffffff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0xe7000000-0xfbffffff]
pci_bus 0000:00: resource 5 [io 0x1000-0x5fff]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff]
pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 11 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfbbfffff]
pci_bus 0000:03: resource 2 [mem 0xe7000000-0xe70fffff pref]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:02: resource 2 [mem 0xe7100000-0xe71fffff pref]
pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbffffff]
pci_bus 0000:04: resource 2 [mem 0xe7200000-0xe72fffff pref]
pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf5e00000-0xf5ffffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff 64bit pref]
pci_bus 0000:01: resource 4 [mem 0xe7000000-0xfbffffff]
pci_bus 0000:01: resource 5 [io 0x1000-0x5fff]
pci_bus 0000:01: resource 6 [io 0x0000-0x03af]
pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:01: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed44fff]
pci_bus 0000:01: resource 10 [io 0x03b0-0x03bb]
pci_bus 0000:01: resource 11 [io 0x03c0-0x03df]
pci_bus 0000:01: resource 12 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.1: PCI INT B disabled
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:03.0: Boot video device
pci 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
pci 0000:01:04.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25296k freed
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1431382825.350:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 4E180E322ACE6975
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
- Added public key CB445E0DA3EA1F65
- User ID: Red Hat Enterprise Linux Driver Update Program (key 4)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf5df0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-504.12.2.el6prerel7.2.0.0.0_88.3.0.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-504.12.2.el6prerel7.2.0.0.0_88.3.0.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
Refined TSC clocksource calibration: 2533.422 MHz.
Switching to clocksource tsc
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-504.12.2.el6prerel7.2.0.0.0_88.3.0.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-504.12.2.el6prerel7.2.0.0.0_88.3.0.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-504.12.2.el6prerel7.2.0.0.0_88.3.0.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-504.12.2.el6prerel7.2.0.0.0_88.3.0.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:01:04.4
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:0a: setting system clock to 2015-05-11 22:20:30 UTC (1431382830)
Initalizing network drop monitor service
Freeing unused kernel memory: 1292k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 788k freed
Freeing unused kernel memory: 1564k freed
dracut: dracut-004-356.0.2.el6_6.1
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
udev: starting version 147
usb 6-1: new full speed USB device number 2 using uhci_hcd
[drm] Initialized drm 1.1.0 20060810
usb 6-1: New USB device found, idVendor=03f0, idProduct=1027
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Virtual Keyboard
usb 6-1: Manufacturer: HP
usb 6-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input2
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input3
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
[drm] radeon kernel modesetting enabled.
radeon 0000:01:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).
[drm] register mmio base: 0xF5FF0000
[drm] register mmio size: 65536
radeon 0000:01:03.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used)
radeon 0000:01:03.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 12297202 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000037880000).
radeon 0000:01:03.0: WB disabled
radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff880037843000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
radeon 0000:01:03.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x00000000C8001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] VGA-2
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] fb mappable at 0xE8040000
[drm] vram apper at 0xE8000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
radeon 0000:01:03.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:03.0: registered panic notifier
[drm] Initialized radeon 2.37.0 20080528 for 0000:01:03.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
HP HPSA Driver (v 3.4.6-171)
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
hpsa 0000:03:00.0: setting latency timer to 64
hpsa 0000:03:00.0: MSIX
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 48 for MSI/MSI-X
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 49 for MSI/MSI-X
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 50 for MSI/MSI-X
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 51 for MSI/MSI-X
hpsa 0000:03:00.0: Using 4 reply queue(s)
Physical aborts supported: yes
Logical aborts supported: no
hpsa 0000:03:00.0: hpsa0: at IRQ 48 using DAC
scsi0 : hpsa
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
hpsa 0000:04:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
hpsa 0000:03:00.0: RAID device c0b3t0l0 added.
hpsa 0000:03:00.0: Direct-Access device c0b0t0l0 added.
scsi 0:3:0:0: RAID HP P410i 6.40 PQ: 0 ANSI: 5
scsi 0:0:0:0: Direct-Access HP LOGICAL VOLUME 6.40 PQ: 0 ANSI: 5
hpsa 0000:04:00.0: setting latency timer to 64
hpsa 0000:04:00.0: MSIX
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
hpsa 0000:04:00.0: irq 52 for MSI/MSI-X
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
hpsa 0000:04:00.0: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
hpsa 0000:04:00.0: irq 54 for MSI/MSI-X
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
hpsa 0000:04:00.0: irq 55 for MSI/MSI-X
hpsa 0000:04:00.0: Using 4 reply queue(s)
Physical aborts supported: yes
Logical aborts supported: no
hpsa 0000:04:00.0: hpsa1: at IRQ 52 using DAC
scsi1 : hpsa
hpsa 0000:04:00.0: RAID device c1b3t0l0 added.
hpsa 0000:04:00.0: Direct-Access device c1b0t0l0 added.
scsi 1:3:0:0: RAID HP P411 6.40 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access HP LOGICAL VOLUME 6.40 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x1088 bmdma 0x10a0 irq 17
ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x1098 bmdma 0x10a8 irq 17
ata2.00: SATA link down (SStatus 4 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 300)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: ATAPI: TEAC DV-W28S-VS, G.V0, max UDMA/100
ata1.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM TEAC DV-W28S-VS G.V0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
STARTING CRC_T10DIF
sd 0:0:0:0: [sda] 585871964 512-byte logical blocks: (299 GB/279 GiB)
sd 1:0:0:0: [sdb] 1171743324 512-byte logical blocks: (599 GB/558 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 6b 00 00 08
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 6b 00 00 08
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sdb:
sd 0:0:0:0: [sda] Attached SCSI disk
unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
dracut: Scanning devices sda2 sdb for LVM logical volumes vgroot/plat_root
dracut: inactive '/dev/stripePool_vg/UDR_NO_LowCapacity_pool_vg.img' [8.20 GiB] inherit
dracut: inactive '/dev/vgroot/plat_root' [1.00 GiB] inherit
dracut: inactive '/dev/vgroot/plat_var' [1.00 GiB] inherit
dracut: inactive '/dev/vgroot/plat_usr' [4.00 GiB] inherit
dracut: inactive '/dev/vgroot/plat_tmp' [1.00 GiB] inherit
dracut: inactive '/dev/vgroot/plat_var_tklc' [4.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vgroot-plat_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1431382834.900:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Apr 7 2015
ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092f conflicts with OpRegion 0x0000000000000920-0x000000000000092f (\SGPE) (20090903/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
scsi 0:3:0:0: Attached scsi generic sg0 type 12
sd 0:0:0:0: Attached scsi generic sg1 type 0
scsi 1:3:0:0: Attached scsi generic sg2 type 12
sd 1:0:0:0: Attached scsi generic sg3 type 0
sr 2:0:0:0: Attached scsi generic sg4 type 5
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.5f (Feb 20, 2014)
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 31, node addr 00:26:55:7c:5d:bc
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39
bnx2 0000:02:00.1: setting latency timer to 64
bnx2 0000:02:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 39, node addr 00:26:55:7c:5d:be
hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ipmi message handler version 39.2
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si 0000:01:04.6: probing via PCI
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ipmi_si 0000:01:04.6: [mem 0xf5ef0000-0xf5ef00ff] regsize 1 spacing 1 irq 21
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf5ef0000, slave address 0x0, irq 21
IRQ 21/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
ipmi_si 0000:01:04.6: Using irq 21
ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11)
ipmi_si 0000:01:04.6: IPMI kcs interface initialized
power_meter ACPI000D:00: Found ACPI power meter.
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU8 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU9 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU10 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU11 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU12 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU13 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU14 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU15 sig=0x106a5, pf=0x1, revision=0x19
platform microcode: firmware: requesting intel-ucode/06-1a-05
Microcode Update Driver: v2.00 , Peter Oruba
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
TCP TKLC_cubic registered
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts:
ipmi device interface
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 56 for MSI/MSI-X
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: irq 64 for MSI/MSI-X
bnx2 0000:02:00.0: eth01: using MSIX
ADDRCONF(NETDEV_UP): eth01: link is not ready
bnx2 0000:02:00.0: eth01: NIC Copper Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth01: link becomes ready
type=1305 audit(1431382865.542:3): audit_pid=5458 old=0 auid=4294967295 ses=4294967295 res=1
IPMI Watchdog: driver initialized
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts:
sctp: Hash tables configured (established 65536 bind 65536)
ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88031b7b7768), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-342)
ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88031b7b7768), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-342)
ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88031b7b7768), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-342)
ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88031b7b7768), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-342)
ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88031b7b7768), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-342)
ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88031b7b7768), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-342)
ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88031b7b7768), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-342)